Loaner Tools

Part Description: 1/2" Drive Torque Wrench

Dual scale measurement adjustments in both Inch-Pound and Newton meter.

Audible click is generated when you've reached the desired torque setting.

Patented torque adjusting lock/unlock collar.

Internal torque mechanism is manufactured of high grade spring steel.

Returning wrench to lowest setting after each job ensures accuracy and long life.

Precision 41 tooth ratchet head offers greater torque control.

Includes an instruction manual and a heavy duty storage case.

Size: 1/2 Inch Drive

Range: 25 to 250 ft. lbs.

Part Description: Engine Cylinder Hone

Flexible shaft

Adjustable honing tension

2" to 7" diameter range (50.8-177.8mm)2" through 4" and 4" through 7" settings

3 - 220 grit 3" stones

Part Description: Double Flaring Tool

7-piece set includes flaring bar, yoke, and 5 double flare dies for tubing sizes: 3/16, 1/4, 5/16, 3/8 and 1/2" O.D.

Easy to use lever lock flaring bar.

Floating cone for accurate alignment.

Detailed instructions.

Storage case keeps parts organized.

Part Description: Disc Brake Caliper Service Set

For use on most import and domestic vehicles equipped with disc brakes.

Bilingual Instructions

Part Description: Front End Service Set

For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications.

Part Description: Ball Joint/U-Joint Press

4-in-1 ball joint adapter tech kit.

This set includes the necessary tools to service press fit type ball joints without removing the control arm.

Service most car and light truck U joints either on or off the vehicle.

4 x 4 adapters allow removal and installation of upper and lower ball joints on 1967 to current 4WD vehicles with Dana 44 axles.

In addition, remove and install brake anchor pins.

Expand the service capabilities of this set with the W89305 Master Ball Joint Adapter Set.

Part Description: Ball Joint Press Adapter Set

This set expands the service capabilities of the W89304 Ball Joint Service Set.

Includes all receiving tubes removing and installing adaptors needed to work on most GM, Ford and Dodge two and four wheel drive pickups, vans and SUVs through 1997.

Works on press fit upper and lower ball joints.

Set also includes the W89304 live center forcing screw plug.

Application chart included.

Part Description: Tie Rod/Ball Joint Separator Set

5-piece tie rod/ball joint separator tech kit.

For separating most types of pitman arms, tie rods and ball joints found on automotive and light truck applications.

Complete coverage set featuring five different sizes, including separators for late model Ford and GM pickups.

Bilingual instructions.

Part Description: Coil Spring Compressor

For use on most automotive and light truck applications.

Chrome moly steel jaws.

Bilingual instructions.

Part Description: Wheel Bearing Locknut Socket Set

7-piece wheel bearing locknut socket tech kit.

Contains one each 2 3/8", 2 1/2" and 55mm locknuts.

One each 2 1/2", 2 3/4", 2 9/16" and 2 3/8" rounded locknuts.

Part Description: Axle Nut Socket Set

9-piece axle nut socket tech kit.

For removal or installation of axle nuts.

1/2" drive 6 point design.

Heavy duty chrome moly alloy steel construction.

Sizes: 29, 30, 31, 32, 33, 34, 35, 36 and 38mm

Part Description: 4WD Locknut Socket Set

6-piece spindle nut wrench tech kit.

For many 2 wheel and 4 wheel drive light truck applications.

Includes 4x4 spindle removing socket.

Includes Toyota locknut wrench.

Part Description: Strut Spring Compressor

Professional strut spring compressor tech kit.

For most automotive and light truck applications.

Includes locking pins for additional safety.

Drop forged steel constructed.

Bilingual instructions.

Part Description: Front Hub Puller/Installer

For use on most front wheel drive vehicles.

Includes hub installer for some Ford applications.

Bilingual instructions.

Part Description: Rear Axle Bearing Puller

This set includes three pullers for the applications listed below.

The specially designed pullers allow for the removal of semi-floating rear axle bearings by firmly seizing and evenly extracting the bearing.

These tools decrease damage and increase the number of applications.

Use with 5/8" - 18 UNF thread slide hammer.

Set contains: Small rear axle bearing puller (W89326-1) fits minimum bearing tube inside diameter of 1" and maximum axle tube inside diameter of 1 7/8".

Medium rear axle bearing puller (W89326-2) fits minimum bearing tube inside diameter of 1 5/16" and maximum axle tube inside diameter of 2 3/8".

Including 1987-88 Chevrolet and GMC 8 1/2", 1/2 ton rear axle bearing.

Large rear axle bearing puller (W89326-3) fits minimum bearing tube inside diameter of 1 3/8" and maximum axle tube inside diameter of 2 7/8".