Loaner Tools

Part Description: Switch & Sensor Socket Set

7-piece specialty switch socket tech kit.

6 point socket with cutaway portion for wire clearance.

Offset design for confined areas.

Remove and install sensors on computerized engine control vehicles.

Heavy duty alloy steel construction.

Replacement part availability.

Includes: 7/8" (22mm) offset extended oxygen sensor socket.

7/8" (22mm) offset oxygen sensor socket.

7/8" (22mm) vacuum switch socket.

7/8" (22mm) oxygen sensor socket.

1 1/16" (27mm) deep oil switch socket.

1 3/16" (29mm) oil sender unit socket.

1 1/16" (27mm) GM thermal sensor switch socket.

Part Description: GM Northstar Water Pump Wrench

Specially designed for use on 1993 to current Northstar 4.6 Liter, 1997 to current Aurora 4.0 Liter.

Chrome molybdenum.

Instructions on packaging.

Part Description: Fan Clutch Wrench Set

10-piece fan clutch wrench tech kit.

This set allows for easy removal of fan clutches when repairing or replacing water pumps, timing chains or fan clutch.

Also useful when installing or removing engines, and for a variety of other engine service projects.

Hold the fan clutch with the clutch holding tool while using the correct wrench to turn the fan clutch nut (Please note: Be sure to check your automobiles owner's manual for right or left hand thread).

Square drives designed for use with a breaker bar for additional torque.

For use on your Ford, GM or Chrysler.

Parts included: 2 1/4 & 3 1/4" fan pulley holding tool.

2 3/8" fan clutch bolt holding tool.

2 1/8 & 3" fan clutch pulley holding tools.

2 13/16" fan hub wrench.

1 7/16" fan clutch nut wrench.

1 7/16" & 1 9/16" fan clutch wrench.

1 7/8" left hand clutch nut wrench.

Part Description: Valve Spring Compressor

For servicing overhead valve engine with cylinder head removed.

Includes small and large jaws for multiple applications.

Bilingual instructions.

Replacement part availability.

Part Description: Piston Ring Compressor

Includes six sizes of bands for multiple applications.

Replacement part availability.

Sizes SAE: 2 7/8 to 3 1/8", 3 1/8 to 3 3/8", 3 3/8 to 3 5/8", 3 5/8 to 3 7/8", 3 7/8 to 4 1/8" and 4 1/8 to 4 3/8".

Sizes Metric: 73 to 79mm, 79 to 86mm, 86 to 92mm, 92 to 98mm, 98 to 105mm, 105 to 111mm.

Part Description: Steering Wheel Removal Set

For steering wheel removal of most automotive and light truck applications.

Includes steering wheel puller and related bolts.

Includes non threaded puller legs for late model vehicles with non-threaded hubs.

Includes steering wheel lock plate depressing tool.

Includes pivot pin removing tool for servicing tilt steering wheels.

Bilingual instructions.

Part Description: Power Steering & Alternator Pulley Puller/Installer.

For most alternator and power steering pulleys.

Includes power steering line disconnect tool.

Bilingual instructions.

Part Description: Harmonic Balancer Puller/Installer

For removal and installation of harmonic balancers on most automotive and light truck applications.

Master set includes necessary bolts and adapters for most applications.

Bilingual instructions.

Part Description: Bearing Race & Seal Driver Set

10-piece bearing race and seal driver installer kit.

Insert tapered wheel bearing race and seals without damage to the component or axle housing.

Nine disc tool sizes fit most standard wheel bearings.

Tapered sides of disc tools install races, and flat sides install seals.

Includes driver handle with bolt.

Sizes: 1.565, 1.75, 1.965, 2.325, 2.47, 2.555, 2.830, 2.995 & 3.180"

Part Description: Serpentine Belt Tool

16-piece serpentine belt tool tech kit.

Remove and install belts on serpentine systems using spring loaded idler pulleys.

Fits pulleys requiring 13mm, 14mm, 15mm, 16mm and 18mm hex and both 3/8" and 1/2" square drive sizes.

Two extensions can be bolted on for hard to reach areas.

9" bar with 1/2" square drive fits Chrysler 2.5, 3.0 L and Ford 4.6 L engines.

23" bar with 3/8" square drive fits Ford 1.9, 2.3 L and GM 3.1 L engines.

Set also includes a GM Fan Clutch Wrench attachment.

Designed to loosen and tighten fan clutches on 1996 and later GM trucks and vans.

Unique design works with both 10mm and 13mm pulley bolts.

Part Description: Slide Hammer Puller Set

Contains slide hammer with multiple attachments including 2/3 jaw, internal and external pullers, rear axle puller, locking pliers adaptor, puller hook and dent puller.

Bilingual instructions.

Part Description: Pilot Bearing Puller

For removal of pilot bearings or any other items requiring an internal puller.

Includes four separate adaptors for multiple applications.

Bilingual instructions.